A1100 O₂ sensor, ATEX, hastelloy, FFKM/FFPM O-rings, cap w/o grille; ATEX certified only when used with an ATEX 36xxEx instrument

ARTICOLO OBSOLETO

A1100 O₂ sensor, ATEX, hastelloy, FFKM/FFPM O-rings, cap w/o grille; ATEX certified only when used with an ATEX 36xxEx instrument
Codice articolo: A110E-HKS

ARTICOLO OBSOLETO

Contenuto della confezione

Sensor only.
Controller, sensor cable, flow-chamber or process connection must be ordered separately.

Specifiche tecniche

Accuratezza: ±1% of reading, or ± lower measurement range, whichever is greater
Body Material: Hastelloy
Campione: pressione: 0 - 100 bar
Certificazioni: 2004/108/EC - EN 61326-1
Classe di protezione: IP68
Contenuto della confezione : Sensor only.
Controller, sensor cable, flow-chamber or process connection must be ordered separately.
Garanzia: 24 mesi
Intervallo di misura: Range at 25 °C
2935A-A: 10 ppb - 400 ppm or 20 Pa - 1,000 kPa
2952A-A: 1 ppb - 80 ppm or 5 Pa - 200 kPa
2956A-A: 0.1 ppb - 20 ppm or 0.25 Pa - 50 kPa
29552A-A: 2 ppb - 80 ppm or 5 Pa - 200 kPa
Intervallo di temperatura: -5 - 60 °C (23 - 140 °F), without grille, during measurement or
-5 - 95 °C (23 - 203 °F), with grille
Materiale: O-Rings: FFKM/FFPM
Materiali a contatto: Stainless Steel 1.4404 (AISI 316L), surface finish: N5, Ra < 0.4 µm
Membrane (see specification table).
No O-rings are in contact with the sample.
Peso: 0.3 kg
Portata: Recommended flow rate in flow chamber
2935A-A : 25 mL/min
2952A-A : 50 mL/min
2956A-A : 180 mL/min
29552A-A : 50 mL/min
Temperatura ambiente: -5 - 100 °C (23 - 212 °F) (due to electrolyte, but sensor will not be damaged up to 200°C / 392°F) (mechanical)
Tempo di risposta: 2935A-A : 2,5 min
2952A-A : 38 s
2956A-A : 7,2 s
29552A-A : 90 s