TOCTAX TOC analyser, 1-100mg/L, 1 channel

ARTICOLO OBSOLETO

TOCTAX TOC analyser, 1-100mg/L, 1 channel
Codice articolo: LPV375.00.00000

ARTICOLO OBSOLETO

Integrated digestion

High level of uptime

Precise measured values due to representative and homogenised sample

Proven self-cleaning system as standard

Low maintenance, simple and rapid

Specifiche tecniche

Accuratezza: ± 4 % + 0,1 mg/L (1,0 - 24,9 - 50 mg/l C)
  ± 5 % + 0,1 mg/L (1 - 100 mg/l C)
Altezza: incl. cooling unit
Connessione al processo: approx. 100 mL/h
  Atmospheric, 4/6 mm connection for waste, 8/11 mm for overflow tray (ID/OD)
Corrente di uscita: 2 x 0/4 to 20 mA max. 500 Ohm
  PROFIBUS, MODBUS optional
  Service interface RS232
Dimensioni (H x L x P): 1190 mm x 550 mm x 390 mm
Display: Graphics monitor with datalogger and curves display
Grado di protezione : IP54
Intervallo di manutenzione: 3 mesi
  approx. 1 hour per week
Intervallo di misura: 1.00 - 100 mg/L TOC automatic switch over from 1.0-25/50/100mg/l C
  T 100 16 to 18 min
Intervallo di taratura: Automatic at selectable intervals (duration: approx. 36 minutes)
Larghezza: incl. cooling unit
note speciali: Integrated refrigerator for reagent storage
  The chloride concentration (CI) in the sample must not exceed 400mg/l!
Peso: 43 kg (without reagents)
Principio di misura: Based on DIN EN 1484 – wet chemical peroxide sulphate breakdown process with infrared spectroscopic detection (expulsion method)
Process connection (inlet): 3.2 mm OD
Process connection (installation style): (Analyser) Bypass; homogenisated water sample - wall mounting dry installation, protected against direct sunlight
Profondità: incl. cooling unit
Reagent capacitiy: 2 months (standard solution 3-6 months)
Relè: 2 floating limit value contacts 24 V, 1 A
Requisiti Alimentazione (Hz): 50 Hz
Requisiti Alimentazione (Voltaggio): 230 VCA
Standard accessories: Set of reagents, standard absorption solution, suitable for 2 month operations
Temperatura ambiente: 5 - 40 °C
Temperatura del campione: 5 - 40°C (41 - 104°F)