Ultraturb Seawater sc Turbidity Sensor, 0.35 m Cable

Ultraturb Seawater sc Turbidity Sensor, 0.35 m Cable
Codice articolo: LPV415.99.12001
Prezzo unitario Contatti

Large measuring range: 0.0001 - 1,000 NTU

The Hach Ultraturb Seawater sc sensor measures turbidity from 0.0001 to 1000 FNU (NTU) for a wide variety of low to medium range turbidity applications. Use it to effectively monitor conventional filtered water processes, effluent water, distribution systems, and elevated tanks where small-sized particulates or air entrapment may be an issue.

Self-cleaning Sample Chamber

The Ultraturb Seawater sc sensor is available with an automatically self-cleaning sample chamber that guarantees stable measured values. The silicon wiper blades inside the sample chamber are held in place with a magnetic coupling wheel to further keep the sample chamber intact.

Ratio Methodology Detects Sample Chamber Fouling

The Ultraturb Seawater sc sensor uses ratio methodology with detection at 90° and 180° to minimize reflections in the measuring cell and on the windows. In this way, fouling of the sample chamber is detected earlier than with a single detection system. The sensor meets the ISO 7027 turbidity requirements for online process turbidity.

Suitable for seawater, brackish water, raw water and other applications

The new Ultraturb Seawater sc is resistant to salt concentrations up to 65 g/L.

Compatible with Hach Multi-Sensor, Multi-Parameter Digital Controller

The Ultraturb Seawater sc sensor can be used with Hach’s Digital SC Controllers. The SC4500 controller accepts up to two sensors and the SC1000 accepts up to eight sensors. Multiple controllers can be networked to accommodate many more sensors and parameters, reducing the cost per measuring point. Just plug in any Hach “plug and play” digital sensor and it’s ready to use without software configuration. “Plug and play” connectivity means there’s no complicated wiring or set up. Network the Ultraturb Seawater sc sensor with any of Hach’s digital sensors for measuring dissolved oxygen, ORP, conductivity, and many other parameters.

Contenuto della confezione

Hach Ultraturb sc, Factory Test Certificate, 4 wipers, Accessory set LZP816, User Manual

Specifiche tecniche

Accuratezza: ± 0.008 FNU ±1% of reading whichever is greater
(0 - 10 FNU)
Compatibilità centralina: SC4500, SC1000, SC200
Contenuto della confezione : Hach Ultraturb sc, Factory Test Certificate, 4 wipers, Accessory set LZP816, User Manual
Dimensioni (H x L x P): 240 mm x 250 mm x 110 mm
Display: Display provided through connection with Hach SC4500 Digital Controller or Hach SC1000 Universal Controller
Garanzia: 24 mesi
Grado di protezione : IP55
Ingresso: 13 mm ID Tubing or fixed connection (PVC system component pipework)
Intervallo di misura: 0.0001 - 1000 FNU (TE/F, NTU, FNU) can be programmed as required (0.001-250 EBC = 2500 ppm SiO2) (Note: 1 FNU is equivalent to 1 NTU)
Intervallo di pressione: 6 bar at 20 °C
Lunghezza del cavo: 0.35 m
Materiale: Housing: ASA; Window: Quartz; Wiper Blade: Silicon; Wiper Shaft: stainless steel 1.4571
Metodo di misura: 90° infrared pulse scattered light technique in accordance with DIN EN ISO 7027
Metodo di taratura: Stablcal
Modello: Ultraturb seawater sc
Peso: Approx. 1.5 kg
Pulizia sensore: Wiper, automatic
Ripetibilità: ± 0.003 FNU or ± 0.5% of reading (whichever is greater) from 0 - 2 FNU
Risoluzione: 0.0001 - 0.9999 / 1.000 - 9.999 /
10.00 - 99.99 / 100 - 1000 FNU (NTU)
Scarico: 13 mm ID Tubing or fixed connection (PVC system component pipework)
Temperatura del campione: Massimo. 50°C (122°F)
Temperatura di lavoro: 2 - 40 °C
Tempo di risposta: 1 - 60 s (programmable)
Tergicristallo automatico: Sì
Velocità di flusso del campione: 0.2 - 1 L/min
verifica: Stablcal